Servo Power Saving Machine in India

SERVO POWER SAVING MACHINE

TECHNICAL SPECIFICATION

Item Unit IM-30 IM-50 IM-75 IM-100 IM-160 IM-220 IM-250 IM-350
Injection Unit - A B C A B C A B C A B C A B C A B A B A B
Screw Diameter mm 18 25 30 25 30 35 30 35 40 35 40 45 40 45 52 52 60 52 60 68 76
Plasticizing Capacity kg/hr 10 26 40 24 41 54 34 43 72 37 65 80 77 100 154 121 165 121 165 189 221
Shot Volume cc 21.6 42 60 49 71 96 81 110 145 120 158 200 226 286 382 467 622 467 622 981 1225
Shot Weight   (PS) gm 19.4 37 54 44 64 86 73 98 129 107 141 179 205 255 340 415 555 415 555 875 1095
Injection Pressure kg/cm2 2500 2020 1400 2510 1880 1380 2625 1930 1480 2570 1945 1540 2450 1935 1450 1905 1430 1905 1430 1865 1490
Injection Rate cm3/sec 23 44 63 39 57 77 57 78 102 76 100 125 126 161 215 226 301 226 301 296 369
Screw Stroke mm 85 100 115 125 180 220 220 270
Nozzle Stroke mm 180 200 220 280 320 435 435 530
Screw Speed rpm 400 400 325 275 270 240/125 240/125 180/90
Heating Zone nos 4 4 4 4 4 4 4 4
Clamping Unit - - - - - - - - -
Clamping Force Ton 30 50 75 100 160 220 250 350
Opening Stroke mm 230 250 280 320 400 500 550 650
Mould Height (Min/Max) mm 150/250 180/300 180/350 200/390 220/450 230/500 250/550 320/670
Maximum Daylight mm 480 550 630 710 850 1000 1100 1320
Tiebar Distance mm 260 × 260 310 × 250 360 × 270 410 × 300 510 × 410 560 × 560 610 × 610 710 × 710
Platen Size mm 390 × 390 460 × 430 530 × 470 610 × 530 740 × 650 820 × 820 890 × 890 1020 × 1020
Ejector Stroke mm 50 70 75 80 100 110 110 125
Ejector Force Ton 1.6 2.8 3.3 4 4.6 4.6 4.6 8.9
Electric Devices - - - - - - - - -
Pump Motor Kw 8 8 11 11 15 32 30 37
Heating Power Kw 2.62 3.5 4.6 6.5 11.5 9.5 11.5 15.5
General - - - - - - - - -
Machine Size Mtr 2.9 × 1.0 × 1.5 3.1 × 1.1 × 1.5 3.1 × 1.2 × 1.8 3.5 × 1.2 × 1.7 5.12 × 1.08 × 1.93 5.84 × 36 × 2.22 5.92 × 1.36 × 2.22 7.06 × 1.53 × 2.25
Machine Weight Ton 1.7 2 3 3.9 6 450 550 550
HYdraulic Oil Tank Ltr 140 150 180 240 440 80 80 80
Powered by : #1 Vinayak InfoSoft