| Item | Unit | MH-2R-45T | MH-2R-60T | MH-2R-85T | MH-2R-120T | MH-2R-160T | MH-2R-200T | MH-2R-300T | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model Specification | - | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C |
| Screw Diameter | Mm | 25 | 28 | 32 | 28 | 32 | 36 | 32 | 36 | 40 | 36 | 40 | 45 | 45 | 50 | 55 | 55 | 60 | 65 | 65 | 70 | 75 |
| Theoretical Injection Volume | cm | 63.8 | 80 | 104 | 80 | 104 | 132 | 113 | 142 | 176 | 162 | 201 | 254 | 318 | 393 | 475 | 570 | 678 | 796 | 1193 | 1384 | 1589 |
| Injection Weight(PS) | g(oz) | 59.3(2.1) | 74.4(2.6) | 96.7(3.4) | 74.4(2.6) | 96.7(3.4) | 122.9(4.3) | 105(3.7) | 132(4.6) | 164(5.8) | 151(5.3) | 187(6.6) | 236(8.3) | 296(10.4) | 365(12.8) | 442(15.6) | 530(18.6) | 630(22.2) | 740(26.1) | 1009.5(39.05) | 1287(45.3) | 1477.5(52) |
| Max. Injection Pressure | Mpa(kgf/cm) | 192(1960) | 153(1563) | 117(1195) | 212(2170) | 162(1661) | 128(1312) | 229(2331) | 181(1842) | 146(1492) | 222(2268) | 180(1838) | 142(1452) | 218(2226) | 177(1803) | 146(1490) | 235(2406) | 198(2022) | 168(1722) | 227(2319) | 196(2000) | 170(1742) |
| Injection Rate | cm/s | 53 | 67 | 87 | 73 | 95 | 121 | 94 | 118 | 146 | 124 | 154 | 195 | 178 | 220 | 266 | 214 | 254 | 298 | 401 | 465 | 534.3 |
| Injection Speed | mm/s | 110 | 118 | 116 | 123 | 112 | 90 | 121 | ||||||||||||||
| Speed Improvement | mm/s | 220 | 164(45T) | 220(45T)/165(60T) | 295(45T)/217(60T)/153(85T) | 290(60T)/200(85T)/168(160T) | 225(120T)/148(160T) | 220(45T)/165(60T) | ||||||||||||||
| Screw Rotation Speed | Rpm | 0 ~ 240 | 0 ~ 240 | 0 ~ 300 | 0 ~ 300 | 0 ~ 300 | 0 ~ 180 | 0 ~ 400 | ||||||||||||||
| Nozzle Out from Platens | mm | ≥45 | ≥45 | ≥45 | ≥45 | ≥45 | ≥45 | ≥45 | ||||||||||||||
| Clamping Unit | - | - | - | - | - | - | - | - | ||||||||||||||
| Clamping Force | KN(tf) | 441(45) | 588(60) | 833(85) | 1176(120) | 1568(160) | 1960(200) | 2940(300) | ||||||||||||||
| Clamping Stroke | Mm | 200 | 200 | 250 | 280 | 300 | 350 | 450 | ||||||||||||||
| Min. Mold Thickness | Mm | 150(200) | 180(260) | 230(330) | 280(380) | 300(400) | 350(450) | 350(450) | ||||||||||||||
| Max. Opening | Mm | 350(400) | 380(460) | 480(580) | 560(660) | 600(700) | 700(800) | 800(900) | ||||||||||||||
| (L* W) Max. Mould Size | Mm | 300 × 300 | 320 × 320 | 340 × 340 | 420 × 420 | 500 × 500 | 600 × 600 | 500 × 800 | ||||||||||||||
| Diameter of Rotary Table | Mm | 780 | 880 | 980 | 1170 | 1360 | 1590 | 1800 | ||||||||||||||
| Ejector Distance | Mm | 75 | 100 | 100 | 100 | 120 | 150 | 127 | ||||||||||||||
| Ejector Force | KN(tf) | 26.5(2.7) | 26.5(2.7) | 45(4.6) | 45(4.6) | 45(4.6) | 45(4.6) | 56.8(5.8) | ||||||||||||||
| General Data | - | - | - | - | - | - | - | - | ||||||||||||||
| System Pressure | Mpa(kgf/cm) | 13.7(140) | 13.7(140) | 13.7(140) | 13.7(140) | 13.7(140) | 13.7(140) | 17.15(175) | ||||||||||||||
| Oil Tank Capacity | L | 200 | 230 | 310 | 410 | 850 | 920 | 676 | ||||||||||||||
| Motor Power | Kw(HP) | 7.5(10) | 11(5) | 15(20) | 18.5(25) | 18.5(25) | 22(30) | 45(61) | ||||||||||||||
| Machine Dimensions | M | 2*1.5 | 2.1*1.6 | 2.4 * 1.8 | 2.5 * 2.0 | 2.7 * 2.2 | 3.2 * 2.5 | 4.1 * 2.1 | ||||||||||||||
| 2.8 | 3 | 3.5 | 4.1 | 4.5 | 5.3 | 5.4 | ||||||||||||||||
| Machine Weight | tf | 2.1 | 2.6 | 4.2 | 6.4 | 9.4 | 14 | 22.9 | ||||||||||||||
We “Esemplast” are a distinguished manufacturer of a wide range of Plastic Injection Moulding Machine, Precision Injection Moulding Machine, Pet Preform Injection Moulding Machine, etc.
